Quick cpu 3 1 1 0

Around and let see if someone else use the same board and could confirm your readings . #7 all the temp are good this auxiliary must be the same thing i have with another name that show -128 c on my system , stay around and let see if someone else use the same board and could confirm your readings . OK, thanks...My Motherboard is an ASUS P8H61-M Pro. Feb 18, 2010 30,587 324 107,640 #8 nice little board you could do some overclock with her . #9 I'm quite worried about my Temperature #1 reading. And since you were waiting for somebody with a similar system I thought I'd post:+- ASUS P8Z68-V LX (/mainboard)| +- Nuvoton NCT6776F (/lpc/nct6776f)| | +- Temperature #1 : 78.5 26.5 86 (/lpc/nct6776f/temperature/1)| | +- Temperature #2 : 56 50.5 59 (/lpc/nct6776f/temperature/2)| | +- Temperature #3 : 32 30 32 (/lpc/nct6776f/temperature/3)|+- Intel Core i7-2600K (/intelcpu/0)| +- CPU Core #1 : 41 38 65 (/intelcpu/0/temperature/0)| +- CPU Core #2 : 41 38 68 (/intelcpu/0/temperature/1)| +- CPU Core #3 : 40 37 65 (/intelcpu/0/temperature/2)| +- CPU Core #4 : 35 31 58 (/intelcpu/0/temperature/3)| +- CPU Package : 41 38 68 (/intelcpu/0/temperature/4)|+- NVIDIA GeForce GTX 570 (/nvidiagpu/0)| +- GPU Core : 54 54 57 (/nvidiagpu/0/temperature/0)Any ideas / opinions guys? Feb 18, 2010 30,587 324 107,640 #10 your on stock cooler i would suggest to use after market one for the cpu like the evo 212 and mx2 or mx4 as cooling paste they do not need cure time . #11 I have similar temperatures, no problems so far:|+- ASUS P8H67-M PRO (/mainboard)| || +- Nuvoton NCT6776F (/lpc/nct6776f)| | +- CPU Core : 47.5 45.5 50 (/lpc/nct6776f/temperature/0)| | +- Temperature #1 : 73.5 50.5 83 (/lpc/nct6776f/temperature/1)| | +- Temperature #2 : 90.5 88 96 (/lpc/nct6776f/temperature/2)| | +- Temperature #3 : 37 37 38 (/lpc/nct6776f/temperature/3)|+- Intel Core i5-2400 (/intelcpu/0)| +- CPU Core #1 : 53 49 59 (/intelcpu/0/temperature/0)| +- CPU Core #2 : 54 52 61 (/intelcpu/0/temperature/1)| +- CPU Core #3 : 55 51 59 (/intelcpu/0/temperature/2)| +- CPU Core #4 : 53 49 58 (/intelcpu/0/temperature/3)| +- CPU Package : 58 55 61 (/intelcpu/0/temperature/4)+- NVIDIA GeForce GTX 570 (/nvidiagpu/0)| +- GPU Core : 59 58 60 (/nvidiagpu/0/temperature/0)I looked for the data sheet of the chip and the specifications say the operating temperature is T = 0°C to +70°C (well, we're 20 degrees over! )Storage temperature -55 to +150°CSource: page 416 Advertising Cookies Policies Privacy Term & Conditions Topics

Flag in config.mk needs to changed to GCCARMv8 or ARMCLANG (experimental).For POWER builds, the COMPILER flag in config.mk needs to changed to GCCPOWER or XLC (experimental).For Nvidia GPU support, set NVIDIA_INTERFACE in config.mk to true and adjust build-time variables if neededFor AMD GPU support, set ROCM_INTERFACE in config.mk to true and adjust build-time variables if neededUsage exampleslikwid-topology--------------------------------------------------------------------------------CPU name: Intel(R) Core(TM) i7-6700K CPU @ 4.00GHzCPU type: Intel Skylake processorCPU stepping: 3********************************************************************************Hardware Thread Topology********************************************************************************Sockets: 1Cores per socket: 4Threads per core: 2--------------------------------------------------------------------------------HWThread Thread Core Die Socket Available0 0 0 0 0 * 1 0 1 0 0 * 2 0 2 0 0 * 3 0 3 0 0 * 4 1 0 0 0 * 5 1 1 0 0 * 6 1 2 0 0 * 7 1 3 0 0 * --------------------------------------------------------------------------------Socket 0: ( 0 4 1 5 2 6 3 7 )--------------------------------------------------------------------------------********************************************************************************Cache Topology********************************************************************************Level: 1Size: 32 kBCache groups: ( 0 4 ) ( 1 5 ) ( 2 6 ) ( 3 7 )--------------------------------------------------------------------------------Level: 2Size: 256 kBCache groups: ( 0 4 ) ( 1 5 ) ( 2 6 ) ( 3 7 )--------------------------------------------------------------------------------Level: 3Size: 8 MBCache groups: ( 0 4 1 5 2 6 3 7 )--------------------------------------------------------------------------------********************************************************************************NUMA Topology********************************************************************************NUMA domains: 1--------------------------------------------------------------------------------Domain: 0Processors: ( 0 4 1 5 2 6 3 7 )Distances: 10Free memory: 318.203 MBTotal memory: 7626.23 MB--------------------------------------------------------------------------------likwid-perfctr$ likwid-perfctr -C 0 -g L2 hostname--------------------------------------------------------------------------------CPU name: Intel(R) Core(TM) i7-6700K CPU @ 4.00GHzCPU type: Intel Skylake processorCPU clock: 4.01 GHz--------------------------------------------------------------------------------mytesthost--------------------------------------------------------------------------------Group 1: L2+-----------------------+---------+------------+| Event | Counter | HWThread 0 |+-----------------------+---------+------------+| INSTR_RETIRED_ANY | FIXC0 | 321342 || CPU_CLK_UNHALTED_CORE | FIXC1 | 450498 || CPU_CLK_UNHALTED_REF | FIXC2 | 1118900 || L1D_REPLACEMENT | PMC0 | 6670 || L1D_M_EVICT | PMC1 | 1840 || ICACHE_64B_IFTAG_MISS | PMC2 | 9293 |+-----------------------+---------+------------++--------------------------------+------------+| Metric | HWThread 0 |+--------------------------------+------------+| Runtime (RDTSC) [s] | 0.0022 || Runtime unhalted [s] | 0.0001 || Clock [MHz] | 1613.6392 || CPI | 1.4019 || L2D load bandwidth [MBytes/s] | 197.8326 || L2D load data volume [GBytes] | 0.0004 || L2D evict bandwidth [MBytes/s] | 54.5745 || L2D evict data volume [GBytes] | 0.0001 || L2 bandwidth [MBytes/s] | 528.0381 || L2 data volume [GBytes]

Created by: Diniz_ at: 1/27/2018 4:10 PM (10 Replies) Rating (4) Thanks 5 11 Entries Entries per page: 10 | all 1/27/2018 4:10 PM Rate (0) Diniz_ Bronze Member Joined: 7/2/2016 Last visit: 6/18/2024 Posts: 120 Rating: (29) dear experts,is there a way to data exchange between CPU S7-300/400 and SQL database without WinCC ?if yes, how?Step7 - manager hope this help, if it was helpful please rate the post!----BR,Diniz Carvalho Suggestion To thank Quote Answer 1/28/2018 3:15 PM Rate (1) Duris_I Diamond Expert "> Joined: 4/28/2015 Last visit: 2/24/2025 Posts: 10832 Rating: (836) Hello,first one quick solution what I'll be make is create your own 'bridge' application on PC via some high programming language. You can collect via one connection required data from PLC and also exchange data to/from SQL DB. With best regards...Ivan DurisFlight: OMICO Suggestion To thank Quote Answer This contribution was helpful to 1 thankful Users Diniz_ 1/28/2018 3:44 PM Rate (1) Ste39 Platinum Member Joined: 1/21/2013 Last visit: 11/20/2024 Posts: 4620 Rating: (710) Diniz_dear experts,is there a way to data exchange between CPU S7-300/400 and SQL database without WinCC ?if yes, how?Step7 - manager Hello Diniz,please have a look: Where do you procure the firmware extension for the CP 343-1 ERPC ... www.sql4automation.com. OPC Client for ODBC PLC SQL Link Last edited by: Ste39 at: 1/28/2018 3:48:55 PM Suggestion To thank Quote Answer This contribution was helpful to 1 thankful Users Diniz_ 1/28/2018 8:44 PM Rate (0) Diniz_ Bronze Member Joined: 7/2/2016 Last visit: 6/18/2024

> Access Protection > Enable. If you enable access protection for the first time with this menu command, a dialog opens in which you will need to log on with SIMATIC Logon. You will then be prompted to assign a project password. The relevant project or library can then only be edited by an authenticated user or after entering the project password. Hope this help, do give me your feedback. Suggestion To thank Quote Answer 7/11/2013 5:39 AM Rate (0) Ammy Platinum Member Joined: 4/19/2008 Last visit: 11/21/2024 Posts: 1525 Rating: (159) MHasanDear All,I need to know, how to password protect Step7 v5.5Project (program), so that if i have to open my Project (program) in Step v5.5 i have to put password first before accessing program.I also need to know, how to password protect myplc CPU 416-2 DP (6ES7416-2XN05-0AB00) from uploading/downloading program.Hello MHasan,If you Want to give the Password to the Step 7 Project, then You have to Used the Simatic Logon, (But I have used with PCS7 Project Not Only on Step7, it will used the Windows User)For the CPU Password Go to Hardware Configuration - CPU Properties - Protection Define the 3 Level Password (Read/write). AmmyNew for every one..............“No duty is more urgent than that of returning thanks.”If Problem Solved......!I can't help you privately - please post in the Forums Suggestion To thank Quote Answer 7/11/2013 5:54 AM Rate (0) MHasan Posts: 63 Rating: (4) Dear All,Thanks for your quick helpfull replies.from where simatic log on download is available for step7 v5.5? Suggestion To thank Quote Answer 7/11/2013 5:57 AM Rate (0) SMHZ Bronze Member Joined: 10/19/2012 Last visit: 4/17/2022 Posts: 315 Rating: (9) MHasanDear All,Thanks for your quick helpfull replies.from where simatic log on download is available for step7 v5.5?It is not part of Step 7 & come as an additional software, look at this: Suggestion To thank Quote Answer This contribution was helpful to 1 thankful Users S7 AUTOMAN 7/11/2013 7:03 AM Rate (1) Ayman Elotaify Platinum Expert Joined: 5/28/2008 Last visit: 3/12/2025 Posts: 4518 Rating: (843) MHasanDear All,Thanks for your quick helpfull replies.from where simatic log on download is available for step7 v5.5?Hello MHasan,It's not a free ware to download. Here's bellow link for ordering data: this helps. Ayman Elotaify Suggestion To thank Quote Answer This contribution was helpful to 1 thankful Users hdhosseini