Flat tube
Author: g | 2025-04-24
Flat tube Low friction flat tube Mechatronic flat tube Shield mechatronic flat tube; type: UFF: UFLF: MF: SMF: shape: Multi-hearted flat: Multi-hearted flat: Flat with built-in electric wire: Flat with built-in shielded wire: built-in-wire-High
WO/2025/ FLAT TUBE, FLAT TUBE HEAT
Towel Radiators OverviewFor years now, Europeans have found the key to unlocking a bathroom's potential is the comfort provided by the Runtal line of towel radiators. Runtal Towel Radiators offer comfortable radiant heat in the bathroom while at the same time providing the luxury of warm, dry towels and bathrobes.Runtal Electric Towel Radiators are available in two basic designs: flat panel and round tube. The flat-panel design Omnipanel II, offers enhanced heat output and a clean, low profile design available in three sizes. The round-tube series includes 5 models Neptune, Radia, Solea, Versus and Fain, available in a range of finishes and sizes. Towel Radiators may be found in many of the worlds finest hotels, inns and spas. Styles Flat Tube Designs The original Omnipanel Towel Radiator was introduced to North America in 1985 as the flagship of the Runtal Towel Radiator line. The design maximized surface area and thus radiant output. The second generation, the Omnipanel ll, offers an even larger surface area and is available in three heights and a choice of three voltages. The Omnipanel ll also offers two options for operation: The D model has a built-in toggle switch. The H model is supplied without controls on the unit and provides a solution for applications where building codes won't permit unit mounted controls for specific placements, such as above a tub. The Omnipanel II is available in three heights and a choice of three voltages (120, 208 and 240 volts) Round Tube Designs Runtal offers five round tube towel radiators in 120 volts. Each model is offered in either direct wire (Model D) or plug-in version (Model PG) with Runtal’s exclusive soft-touch five setting digital control (off/lo/med/hi/on hi timer for 3 hours). Flat Tube Design Runtal Omnipanel ll A True HeaterThe original Omnipanel Towel Radiator was introduced to America in 1985 as the flagship of the Runtal towel radiator line. The design maximized surface area and thus radiant output. The second generation, the Omnipanel II, offers an even larger surface area and is available in three heights and a choice of three voltages (120, 208 and 240 volts) The Omnipanel II also offers two options for operation: The D model has a built-in lit toggle switch. The H model is supplied without a control on the unit and provides a solution for applications where building codes won’t permit unit mounted controls such as placement above a tub.Owners Manual & Installation Instructions (PDF) Round Tube Designs Runtal Neptune Runtal Radia Runtal Versus Runtal Fain The Runtal Difference DurabilityThese radiators are built to last. One-piece fully welded steel construction and an electrostatically applied advanced powder coat finish ensure years of lasting safe and lasting beauty.VersatilityBy design, Runtal baseboard
Flat tubing, Flat tube - All medical device manufacturers
This is a multi tool to help install the PTFE tube on the ‘AMS Light Saver Snag Cutter’ by Hexavalent.Warning: When using this tool be sure to keep it flat against a table to avoid cutting yourself. Follow the below steps for use as well as Hexavalent's assembly instruction video: Steps:2. Take your PTFE/Teflon tube and place it through to the slot, closest to the clamp, as shown on the left of the image below and cut through the slot with your blade of choiceYou'll notice a small recess in the tip of the clamp part. pinch the clamp down and bump up the tube to that ledge. Hold down the clamp and cut at the middle 1/4in (6mm) slot. Now you have your small tube to install on the bottom of the AMS Light Saver in a later step.Note: You can even use the Bambu Labs cutter you'll be using on the AMS Light Saver. (original AMS Saver Multi-Tool pictured)2. Choose between the 5-1/2in (140mm) or 5-3/8in (137mm) slots to cut your PTFE tube to length by holding the clamp down.3. Use the clamp of the tool to hold the small cut tube done in step 1 to install into the base of the AMS Light Cutter. Use the flat portion of the tool to push the tube in.4. Next, put the longer cut tube(s) into the clamp portion of the tool and pinch with your fingers. Twist into the top of the cutter to install until the tube is revealed in the indicator hole.Use the clamp to hold the tube above the curved tube guide to assist attaching the triangular filament guide.Special feature!!!Included in the center of each of the cutting slots is a hole to hold a small piece of filament to use to take apart the AMS Light Saver. You can also use a cutting slot to cut that piece of filament, just make sure the filament is above about 5/8in (16mm).And there you have it, a tool to help you install all four of your AMS Light Savers to prevent those pesky tape stoppages. Enjoy!Aluminum Radiator Flat Tube - Microchannel Tubes
Ecklers.com Change Vehicle Deals Lifestyle Brakes Drivetrain Electrical & Wiring Engine Browse Categories in Engine Air, Oil & Fuel Filters Alternators Batteries Camshafts Crate Engines & Blocks Cylinder Heads & Valvetrain Components ECUs & Engine Management Systems EFI Conversions Engine Dress Up Fuel Delivery & Injectors Gaskets & Seals HVAC Parts Ignition Parts Motor Mounts Oil & Engine Fluids Oil Pans Radiators & Cooling System Parts Remote Start, Keyless Entry, & Alarm Reservoirs and Tanks Supercharger & Turbocharger Kits & Accessories Tuners & Accessories Underdrive Pulleys Valves, Sensors & Sending Units Exhaust Exterior & Body Browse Categories in Exterior & Body Bed and Tailgate Accessories Body Kits Bumpers Car Covers, Bras & Paint Protection Convertible Top Parts Decals, Stickers and Racing Stripes Emblems & Badges Exterior Trim Hoods Light Bars & Wind Deflectors Light Trim & Bezels Mirrors, Mirror Covers & Side Mirrors Mud Flaps Side Step Bars & Running Bars Tire Carriers & Accessories Towing & Hitches Vinyl Wrap & PPF Accessories Wheels Interior & Upholstery Lights Suspension Wheels & Tires Showing Results for Product Information Description, Q&A Description NOTE: There is usually a 4 month delivery time on this radiator due to demand and material shortages. Please order well in advance to avoid missing any events where you hope to enjoy your Model T!Flat tube radiators are not as original, BUT are more efficient at cooling & have greater capacity for the "driver" cars.1913-1914 radiators were stamped with the Ford script and Made in USA, and have 2-1/2 inch tall filler neck with 3 rivets, a reinforcing bar in lower section of the core and a carbide tube soldered to the lower tank.These quality authentic reproduction radiators offer the ultimate in cooling efficiency. They have a modern style flat tube core design best suited for Speedsters, parade cars and long day tours. For a show car or those restorers seeking an original style radiator select the round tube design. CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov Questions & Answers Showing Results for Showing Results for Recently Viewed Sponsored Ad Sponsored Ad. Flat tube Low friction flat tube Mechatronic flat tube Shield mechatronic flat tube; type: UFF: UFLF: MF: SMF: shape: Multi-hearted flat: Multi-hearted flat: Flat with built-in electric wire: Flat with built-in shielded wire: built-in-wire-High Extruded aluminum flat tube. There are two kinds of extruded aluminum flat tubes. One is a hollow flat tube with a single port, another is extruded aluminum multi-port flat tube (know moreAmazon.com: No Flat Bike Tubes
Box ID：A038 Box Name：Double insert, inner compartment, lock, concealed/flat clasp, upper and lower pair of tube boxes, co Tag：Up and down to the tube box, internal folding for partition, lock, concealed/flat buckle, color box, cardboard corrugated pit cartons, packaging structure design, packaging box structure, packaging de Description：This is a very common box type--- tube type box with reverse tuck. For this box template, there are three tuckstructures in the box template library of Packmage CAD, And dustflaps has two offset ways.Packaging structure design features:1 One board after folding, and glued the two opposite edges, can form one tube body.2 The adhesive position is extended and folded to form an inner support structure, a partition structure.3 Opening on the upper and down sides for sealing end of the reverse tuck.4 Tuck structures: sloved the problem that the box can be self-opened. There are lock structures between tucks and dustflaps.Advantages and usages of this packaging structure:1 Tube type box must be convenient to let products in, and can not be opened easily. It must be protective.2 This packaging box structure usually used in the bottle packaging, for example: cosmetics packaging.Key points of cosmetic packaging design:1 Packaging should be colorful, has good texture with beautiful pictures.2 Cosmetic packaging is usually folding carton, but also has compose type structure.3 The purpose is to make consumers believe that they can be elegant, beautiful and acctractive. Sample Show(0)POLYURETHANE FLAT TUBE - mebraplastik.com
Toolbox, so it was an easy choice for me. The internal diameter of the sleeve was really close, within 0.5 - 1mm, but it was too small. I tried to press-fit the sleeve after heating it, but I ended up having the lens machined down 0.5mm and the sleeve pressed on. The secret to a threaded sleeve is that you can mount the lens forwards or backwards, and make fine adjustments that would not be possible with a flat ring type adapter. The lock ring keeps the lens wobble-free, solid and secure in the mount. Scanner Nikkor 7 element bare lens with Thorlabs SM1 parts laid out and installed. With the SM1 sleeve in place there are lots of high-quality adapters available at Thorlabs to take it to any thread size you need, I chose M42 since my standard studio set-up is based on this thread, a detailed review of that set-up is available here on Closeuphotography.com.With the SM1 - M42 flat adapter in place the Scanner Nikkor screws into place in my standard RAF Camera variable M42 extension tube setup, as you can see below. Scanner Nikkor ED 7 element lens mounted on RAF camera extension tubes and Thorlabs SM1 adapters. This is the Scanner Nikkor ED 7 element lens installed in a RAF camera M42 x 50mm variable extension tube, that will allow extension from 55mm to 90mm, mounted inside a RAF M42mm x 50mm tube. I use the variable tube to set an exact magnification rate, but you can also use it to set precise framing, or use it to focus like a focus ring on a normal lens. The use or variable tubes is not that common in macro photography. I started using this type of variable tube after purchasing a couple of industrial machine visionFlat Tube - Made-in-China.com
Between Measuring Faces by Means of Interference Fringe Produced by an Optical Parallel. The parallelism between the measuring faces can be determined as follows; place the optical parallel to the anvil and observe the number of interference fringes produced on the spindle side under the measuring force of the micrometers. The parallelism is about 1µm (0.32µm x 3 = 0.96µm). Fringe on the anvil side must not be more than one. Mitutoyo Telescoping Gage Set Series 155 Mitutoyo Telescoping Gages Series 155 feature spring-loaded plungers that expand within the bore (or groove), allowing determination of the internal diameter or groove width). With a knurled clamp. Supplied in a fitted pouch. Mitutoyo Uni-Mike Interchangeable Anvil Type Micrometers Series 117, 317 Mitutoyo Uni-Mike Interchangeable Anvil Type Micrometers measure tubing thickness, shoulderedge distance, rivet head height, etc. with interchangeable anvils (flat anvil, rod anvil, V-anvil). Mitutoyo Tube Micrometers Series 115, 295 Mitutoyo Series 115, 295 Tube Micrometers are designed to measure the wall thickness of various tubing. The tube micrometers have two combinations of measuring faces (carbide tipped): spherical-flat type, and spherical type. Mitutoyo Standards for V-Anvil Micrometers Series 167 Mitutoyo V-Anvil Micrometer standards are specially designed for the zero point setting of screw thread micrometers. Supplied in fitted carton. Mitutoyo Standards for Screw Thread Micrometers Series 167 Mitutoyo Screw Thread Micrometer standards are specially designed for the zero point setting of screw thread micrometers. Supplied in fitted carton. Mitutoyo Outside Micrometers w/ Friction Thimble Series 103 Mitutoyo Outside Micrometers Series 103 feature. Flat tube Low friction flat tube Mechatronic flat tube Shield mechatronic flat tube; type: UFF: UFLF: MF: SMF: shape: Multi-hearted flat: Multi-hearted flat: Flat with built-in electric wire: Flat with built-in shielded wire: built-in-wire-High Extruded aluminum flat tube. There are two kinds of extruded aluminum flat tubes. One is a hollow flat tube with a single port, another is extruded aluminum multi-port flat tube (know moreComments
Towel Radiators OverviewFor years now, Europeans have found the key to unlocking a bathroom's potential is the comfort provided by the Runtal line of towel radiators. Runtal Towel Radiators offer comfortable radiant heat in the bathroom while at the same time providing the luxury of warm, dry towels and bathrobes.Runtal Electric Towel Radiators are available in two basic designs: flat panel and round tube. The flat-panel design Omnipanel II, offers enhanced heat output and a clean, low profile design available in three sizes. The round-tube series includes 5 models Neptune, Radia, Solea, Versus and Fain, available in a range of finishes and sizes. Towel Radiators may be found in many of the worlds finest hotels, inns and spas. Styles Flat Tube Designs The original Omnipanel Towel Radiator was introduced to North America in 1985 as the flagship of the Runtal Towel Radiator line. The design maximized surface area and thus radiant output. The second generation, the Omnipanel ll, offers an even larger surface area and is available in three heights and a choice of three voltages. The Omnipanel ll also offers two options for operation: The D model has a built-in toggle switch. The H model is supplied without controls on the unit and provides a solution for applications where building codes won't permit unit mounted controls for specific placements, such as above a tub. The Omnipanel II is available in three heights and a choice of three voltages (120, 208 and 240 volts) Round Tube Designs Runtal offers five round tube towel radiators in 120 volts. Each model is offered in either direct wire (Model D) or plug-in version (Model PG) with Runtal’s exclusive soft-touch five setting digital control (off/lo/med/hi/on hi timer for 3 hours). Flat Tube Design Runtal Omnipanel ll A True HeaterThe original Omnipanel Towel Radiator was introduced to America in 1985 as the flagship of the Runtal towel radiator line. The design maximized surface area and thus radiant output. The second generation, the Omnipanel II, offers an even larger surface area and is available in three heights and a choice of three voltages (120, 208 and 240 volts) The Omnipanel II also offers two options for operation: The D model has a built-in lit toggle switch. The H model is supplied without a control on the unit and provides a solution for applications where building codes won’t permit unit mounted controls such as placement above a tub.Owners Manual & Installation Instructions (PDF) Round Tube Designs Runtal Neptune Runtal Radia Runtal Versus Runtal Fain The Runtal Difference DurabilityThese radiators are built to last. One-piece fully welded steel construction and an electrostatically applied advanced powder coat finish ensure years of lasting safe and lasting beauty.VersatilityBy design, Runtal baseboard
2025-03-29This is a multi tool to help install the PTFE tube on the ‘AMS Light Saver Snag Cutter’ by Hexavalent.Warning: When using this tool be sure to keep it flat against a table to avoid cutting yourself. Follow the below steps for use as well as Hexavalent's assembly instruction video: Steps:2. Take your PTFE/Teflon tube and place it through to the slot, closest to the clamp, as shown on the left of the image below and cut through the slot with your blade of choiceYou'll notice a small recess in the tip of the clamp part. pinch the clamp down and bump up the tube to that ledge. Hold down the clamp and cut at the middle 1/4in (6mm) slot. Now you have your small tube to install on the bottom of the AMS Light Saver in a later step.Note: You can even use the Bambu Labs cutter you'll be using on the AMS Light Saver. (original AMS Saver Multi-Tool pictured)2. Choose between the 5-1/2in (140mm) or 5-3/8in (137mm) slots to cut your PTFE tube to length by holding the clamp down.3. Use the clamp of the tool to hold the small cut tube done in step 1 to install into the base of the AMS Light Cutter. Use the flat portion of the tool to push the tube in.4. Next, put the longer cut tube(s) into the clamp portion of the tool and pinch with your fingers. Twist into the top of the cutter to install until the tube is revealed in the indicator hole.Use the clamp to hold the tube above the curved tube guide to assist attaching the triangular filament guide.Special feature!!!Included in the center of each of the cutting slots is a hole to hold a small piece of filament to use to take apart the AMS Light Saver. You can also use a cutting slot to cut that piece of filament, just make sure the filament is above about 5/8in (16mm).And there you have it, a tool to help you install all four of your AMS Light Savers to prevent those pesky tape stoppages. Enjoy!
2025-03-30Box ID：A038 Box Name：Double insert, inner compartment, lock, concealed/flat clasp, upper and lower pair of tube boxes, co Tag：Up and down to the tube box, internal folding for partition, lock, concealed/flat buckle, color box, cardboard corrugated pit cartons, packaging structure design, packaging box structure, packaging de Description：This is a very common box type--- tube type box with reverse tuck. For this box template, there are three tuckstructures in the box template library of Packmage CAD, And dustflaps has two offset ways.Packaging structure design features:1 One board after folding, and glued the two opposite edges, can form one tube body.2 The adhesive position is extended and folded to form an inner support structure, a partition structure.3 Opening on the upper and down sides for sealing end of the reverse tuck.4 Tuck structures: sloved the problem that the box can be self-opened. There are lock structures between tucks and dustflaps.Advantages and usages of this packaging structure:1 Tube type box must be convenient to let products in, and can not be opened easily. It must be protective.2 This packaging box structure usually used in the bottle packaging, for example: cosmetics packaging.Key points of cosmetic packaging design:1 Packaging should be colorful, has good texture with beautiful pictures.2 Cosmetic packaging is usually folding carton, but also has compose type structure.3 The purpose is to make consumers believe that they can be elegant, beautiful and acctractive. Sample Show(0)
2025-04-15Toolbox, so it was an easy choice for me. The internal diameter of the sleeve was really close, within 0.5 - 1mm, but it was too small. I tried to press-fit the sleeve after heating it, but I ended up having the lens machined down 0.5mm and the sleeve pressed on. The secret to a threaded sleeve is that you can mount the lens forwards or backwards, and make fine adjustments that would not be possible with a flat ring type adapter. The lock ring keeps the lens wobble-free, solid and secure in the mount. Scanner Nikkor 7 element bare lens with Thorlabs SM1 parts laid out and installed. With the SM1 sleeve in place there are lots of high-quality adapters available at Thorlabs to take it to any thread size you need, I chose M42 since my standard studio set-up is based on this thread, a detailed review of that set-up is available here on Closeuphotography.com.With the SM1 - M42 flat adapter in place the Scanner Nikkor screws into place in my standard RAF Camera variable M42 extension tube setup, as you can see below. Scanner Nikkor ED 7 element lens mounted on RAF camera extension tubes and Thorlabs SM1 adapters. This is the Scanner Nikkor ED 7 element lens installed in a RAF camera M42 x 50mm variable extension tube, that will allow extension from 55mm to 90mm, mounted inside a RAF M42mm x 50mm tube. I use the variable tube to set an exact magnification rate, but you can also use it to set precise framing, or use it to focus like a focus ring on a normal lens. The use or variable tubes is not that common in macro photography. I started using this type of variable tube after purchasing a couple of industrial machine vision
2025-04-11Archive Home 2019 Brevet 1.3 Sizes XXS (44cm), XS (47cm), S (50cm), M (53cm), L (56cm) Color(s) Satin Tech Silver Frame C10 high-modulus carbon w/ VRTech, integrated head tube w/ 1 1/2" lower, internal cable routing, PF30 BB shell, double water bottle mounts, oversized ETC chainstays, flat-mount disc system, 12mm convertible thru-axle system w/ replaceable hanger & hidden fender eyelet Fork FC-440 carbon monocoque w/ VRTech, tapered carbon steerer, flat-mount disc system, 12mm thru-axle dropout, hidden fender eyelet Crankset Oval Concepts 500, forged 6066 arms, M30 spindle, forged Praxis 50/34T rings Bottom Bracket Praxis conversion bottom bracket Pedals N/A Front Derailleur Shimano Ultegra, braze-on mount Rear Derailleur Shimano Ultegra GS Shifters Shimano Ultegra Dual Control Hydraulic, 11-speed Cassette Shimano HG-700, 11-34T Chain KMC X11 w/ MissingLink Wheelset Oval Concepts 524 Disc, centerlock hubs, 100x12mm & 142x12mm thru axles, 700c 24/28H rims Tires Vittoria Zaffiro Pro, 700 x 30, 60tpi, folding Brakeset Shimano Ultegra Hydraulic, 160/160 rotors Brake Levers Shimano Ultegra Hydraulic Headset FSA, 1 1/8" upper - 1 1/2" lower, integrated Handlebar Oval Concepts 310 Ergo, 6061 alloy, 31.8mm clamp, 133mm drop, 4° sweep Stem Oval Concepts 313, 3D-forged 6061 stem body, +/-7° Tape Anti-Slip Silicone Saddle Oval Concepts 551W Women's with pressure relief zone, cromo rail Seatpost Oval Concepts 905, carbon & alloy, 27.2mm diameter Weight TBD Geometry --> Size XXS XS S M L --> Bike Size 44cm 47cm 50cm 53cm 56cm --> Seat Tube Center To Top 400 430 460 490 520 --> Seat Tube Effective 440 470 500 530 560 --> Top Tube Effective 500 510 525 535 555 --> Head Tube Length 100 125 150 170 190 --> Seat Tube Angle 75.5° 75° 74.5° 73.5° 73.5° --> Headtube Angle 71 71.5 72 72 73 --> Chainstay Length 415 415 415 415 415 --> Wheelbase 984 986 993 993 994 --> Bottom Bracket Drop 69 69 69 69 69 --> Fork Offset 52 52 52 52 43 --> Trail 60.7 57.6 55.1 55.1 57.8 --> Stack 506 531 557 576 602 --> Reach 369 368 371 364 377 --> Standover 713 731 757 779 808 --> Stem 80 90 90 100 100 --> Handlebar Width 380 380 400 400 420 --> Crank 165 165 170 170 172.5 --> Wheel Size 700 700 700 700 700 --> Seat Post Diameter 27.2 27.2 27.2 27.2 27.2
2025-03-26Panel RadiatorsArchitecturally DistinctiveSterling Radiator's Commercial Panel Radiators combine the superiority of radiant heating with graceful architectural design. These sleek, stunning panels are popular in Europe as well as in prestigious commercial applications throughout North America. They can be used as a primary heating system or to supplement traditional heating. Energy Efficient Flat radiating surfaces reduce energy consumption by providing high comfort levels at low thermostat settings. Decorator Designed Styles Available in base-perimeter horizontal flat tube design with either wall or pedestal mounting or vertical flat tube for either wall or ceiling mounting. All of the panel radiator models are designed to complement traditional or contemporary decor. Space Saving Single header radiator panels are only 2-3/4 inches wide and project only 2-1/8 inches from the wall. They are designed not to interfere with the placement of furniture or window treatments.Durable Rugged heavy-gauge, all welded-steel construction ensures long service life under the most demanding commercial conditions. Comfort Sterling Panel Radiators provide a comfortable blanket of radiant warmth. A typical installation of panel radiators offers a system that operates quietly and gently warms the occupants with the radiant effect provided by the flat tube panel radiator design. Protective Finish Commercial Panel Radiators are powder-coated to provide an attractive finish that resists scuffs, scratches and marring.Versatility Sterling Panel Radiators are suitable for individual room heating loads or can be integrated with other hydronic heating equipment in the room. Sterling manufactures panel radiators from 20" to 15-0' long in 2" increments. The BTU outputs per foot span from a mere 100 to an incredible 4900. Depending on the models chosen, these panel radiators can provide heat for a myriad of required room heat loads.Style The narrow panel design allows them to be integrated into any interior design giving the Architect a full range of freedom to provide the client exactly what they want. The panel radiator models work with any décor and can be used to make any kind of statement, from subdued to bright and bold. They can be installed low and continuous below windows or segmented for bay windows. To maximize space savings, they can also be mounted on ceilings or vertical on walls with tall, narrow panels. Sterling Panel Radiators are available in seven standard finishes and over 100 architectural colors.
2025-03-26