Access db samples

The TTL field is missing from a document, the document doesn’t expire.If the TTL field isn't an acceptable type, the document doesn't expire.Limitations of a custom TTLOnly one field in a collection can have a TTL set on it.With a custom TTL field set, the \_ts field can't be used for document expiration.You can't use the \_ts field in addition.ConfigurationYou can enable a custom TTL by updating the EnableTtlOnCustomPath capability for the account. Learn how to configure capabilities.Set up the TTLTo set up the TTL, run this command: db.coll.createIndex({"YOUR_CUSTOM_TTL_FIELD":1}, {expireAfterSeconds: 10})TransactionsMulti-document transactions are supported within an unsharded collection. Multi-document transactions aren't supported across collections or in sharded collections. The timeout for transactions is a fixed 5 seconds.Manage users and rolesAzure Cosmos DB doesn't yet support users and roles. However, Azure Cosmos DB supports Azure role-based access control (Azure RBAC) and read-write and read-only passwords and keys that can be obtained through the Azure portal (on the Connection Strings page).Write concernsSome applications rely on a write concern, which specifies the number of responses that are required during a write operation. Due to how Azure Cosmos DB handles replication in the background, all writes are automatically Quorum by default. Any write concern that's specified by the client code is ignored. Learn how to use consistency levels to maximize availability and performance.Next stepsLearn how to use Studio 3T with Azure Cosmos DB for MongoDB.Learn how to use Robo 3T with Azure Cosmos DB for MongoDB.Explore MongoDB samples with Azure Cosmos DB for MongoDB.Trying

Moderator: Wanderer Forum rules No roms requests or illegal links RomCenter Author Posts: 1523 Joined: Fri Sep 28, 2001 12:34 pm Location: France Contact: RomCenter 3.6.3 released RomCenter 3.6.3 released !What's new from 3.6.2 : - Fix crash when moving several samples - Fix datafiles inconsistencies (missing one parent sample) - Fix bad filename when repairing samples - Fix missing clone bios - Remove double db updateWhat's new from 3.6.1 : - Fix multi files creation when fixing samples - Fix memories leaks - Fix empty files not removed from samples folder - Fix nodump devices incorrect and duplicated - Disable menus while updating db - Fix sha1 not calculated if chd zipped - Fix device roms not used anywhere (add device games) - Fix error when loading compressed files >2GB - Fix bad field name during db update - Fix "multiple values" error in devices query - Fix mess datafiles loadingWhat's new from 3.6.0 : - Duplicated devices cause db error - Uppercase crc not identified - Devices lost when updating a db - Removed roms are now sent to recycle bin as well - Improve mame and derived version identification WARNING: Due to changes in database structure, previous games database ( Download: - Download romcenter 3.6.3 : windows installer (preferred) - Download romcenter 3.6.3 : portable version (no installer) Translations: - French - Hungarian - Japanese - German - Missing translation ? see here A quick start guide:(see the wiki for a tutorial)- Enjoy Eric - RomCenter developerReport bugs here. geogolem Re: RomCenter 3.6.3 released Post by geogolem » Sun Jul 01, 2012 12:23 pm For some reason ROMCENTER reports all my games missing but in the rom paths section all the roms are green and marked as correct files. How does this make sense? geogolem Re: RomCenter 3.6.3 released Post by geogolem » Sun Jul 01, 2012 12:27 pm This only happens when I choose 1G1R..If I load the database and the rom path 1617 games show up green as playable. (Something like 1000 games show up missing). When I select 1G1R it reports 0 games playable, 1617 games missing. RomCenter Author Posts: 1523 Joined: Fri Sep 28, 2001 12:34 pm Location: France Contact: Re: RomCenter 3.6.3 released Post by RomCenter » Mon Jul 02, 2012 5:21 pm Yes, I found that a refresh procedure is missing. This is fixed for next 3.6.4.Until then, refresh all paths

155 Mb/s, 622 Mb/s; –20 dBm at 2488/2500 Mb/s 80C08C Standard Standard 0 dBm to –30 dBm 5% of reading –16 dBm at all filter rates 80C10B*5, 80C25GBE Standard Standard +13 dBm to –21 dBm 5% of reading 25.8 and 27.7 Gb/s: –8 dBm (1550 nm) and –7 dBm (1310 nm); 39.813 to 43.018 Gb/s: –7 dBm (1550 nm) and –6 dBm (1310 nm) 80C11 Standard Standard +4 dBm to –30 dBm 5% of reading –10 dBm at all filter rates; –7 dBm at 20 GHz; –4 dBm at 30 GHz 80C12 Standard Standard 0 dBm to –30 dBm 5% of reading –19 dBm (for all options except Option 10G) –14 dBm (for Option 10G) 80C14 Standard Standard 0 dBm to –30 dBm 5% of reading –15 dBm *5 Option CRTP reduces sensitivity by 0.6 dB (max) and increases noise by 15% (max).*22 Smallest power level for mask test. Values represent theoretical typical sensitivity of NRZ eyes for comparison purposes. Assumes instrument peak-peak noise consumes most of the mask margin.Optical Sampling Module Characteristics (Cont.) Module Extinction Ratio Calibrated Accuracy (Opt. 01 ER Calibrated)*23 Reference Filter in Range [Gb/s] Repeatability (Typical) (to itself and to other 80Cxx-Opt. 01) Accuracy 80C07B — Option not available 80C08C 9.9…11.3 ±0.6% (–0.39 dB / +0.42 dB at 12 dB) ±1.2% (–0.76 dB / +0.92 dB at 12 dB) 80C10B — Option not available 80C11 9.9…11.3 ±0.6% (–0.39 dB / +0.42 dB at 12 dB) ±1.2% (–0.76 dB / +0.92 dB at 12 dB) 80C25GBE — Option not available *23 Low ER signals (ER ≤ 6 dB): signal passes 802.3ae-like mask (scaled horizontally for bit rate); 105 samples in mask. High ER signals (ER > 6 dB): signal passes OC-192-like mask (scaled horizontally for bit rate); 105 samples in mask.TDR System (80E10, 80E08, 80E04 only) Characteristic 80E10 80E08 80E04 Channels 2 2 2 Input Impedance 50 Ω nominal 50 Ω nominal 50 Ω nominal Channel Input Connector 1.85 mm 2.92 mm 3.5 mm Bandwidth 50 GHz 30 GHz 20 GHz TDR Step Amplitude 250 mV (polarity of either step may be inverted) 250 mV (polarity of either step may be inverted) 250 mV (polarity of either step may be inverted) TDR System Reflected Rise Time 15 ps 20 ps 28 ps TDR System Incident Rise Time 12 ps 18 ps 23 ps TDR Step Deskew Range ±250 ps ±250 ps ±50 ps TDR Sampler Deskew Range

Ordering bug fix on APFS volumesVersion 1.0.1 (Released 13 July 2017)Changes:Fix for Sunset Chamber preset not loading when clicking the menu itemFix for Sunset Chamber preset dial selector position not changing (AAX only)DAW host saves using Seventh Heaven on Windows would not load on Mac versions of the DAWVersion 1.0.0 (Released 17 April 2017) Additional Information System RequirementsFeaturesIncluded PresetsAcknowledgements Seventh Heaven supports DAWs meeting the following specification:iLok 2/3, iLok machine activation or iLok CloudWindows 7 and aboveOS X / macOS 10.13 and aboveVST 2.4, VST3, Audio Unit (AUv2) and AAX Native plug-in formats64-bit DAWs are recommended (32-bit is supported)500 MB hard disk space is requiredAt least 8 GB of main memory is recommendedA dual core i5 processor or above is recommendedApple Silicon and Intel macs supported Seventh Heaven’s capabilities are as follows:Thirty multi-sampled Fusion-IR presetsSelection of M7 v1 algorithm presetsSampled at 96 kHz with high quality internal resampling where necessarySamples are provided in a proprietary true-stereo multi-sampled Fusion-IR formatPrecise decay time controlMinimum 200 msMaximum 30 secondsHigh quality interpolation between sampled positionsLow, early and late reverb level controlEarly / late from -20 dB to 0 dBVLF from -20 dB to 0 dB (or off)Pre-delaySelect from 0 to 500 msOptionally sync to host tempoOnly applied to the low frequency and late reverb as per M7DelaySelect from 100 ms to 1 secondFixed at -6dBOptionally sync to host tempoOnly applied to the late reverb as per M7Mix and gain level control2-band oversampled master equaliser1x high pass (12 dB / oct)1x Massberg high cut (12 dB / oct)Tool-tip help available on most parametersInput and output discrete-point metering (-60 to +6 dB)Mono-to-stereo and stereo-to-stereo channel configurations supportedShow or hide the advanced controls and equaliser for a simpler or more functional interface M7 Algorithm v1 presets (x30)All Seventh Heaven presets are derived from algorithm #1, for the full compliment of v1, v2 and nonlinear presets Seventh Heaven Professional is required. Ambience01 Large Ambience02 Med Ambience03 Small Ambience12 Clear Ambience15 Percussion Air Chambers06 Large & Bright09 Snare Chamber10 Vocal Chamber11 A&M Chamber17 Sunset Chamber Halls01 Large Hall04 Large & Near05 Medium & Near12 Sandors Hall19 Boston Hall B Plates03 London Plate07 Old Plate08 Rich Plate18 Fat Plate22 Sun Plate C Rooms01 Studio A02 Studio B Close03 Studio B Far06 Studio E10 Large Wooden Spaces01 North Church02 East Church04 West Church05 Cinema Room06 Scoring Stage All samples were recorded by LiquidSonics Ltd. (as such they are unofficial samples generated by LiquidSonics rather than Bricasti).The samples are copyright Bricasti Design Ltd. and are being distributed exclusively by LiquidSonics Ltd. with permission of Bricasti Design Ltd.The Seventh Heaven Professional plug-in is copyright LiquidSonics Ltd.